FS5 LUTs for Odyssey and Resolve

As of Firmware 2016.06, there are a couple of errors in the Odyssey's handling of RAW data from the Sony PXW-FS5. This affects both DNG RAW recordings and RAW to ProRes recordings, but in different ways.

DNG RAW

DNG RAW files recorded from an FS5 contain the correct RAW data, but an error in the white balance metadata means that they exhibit a color cast when debayered. The following LUTs convert from a Resolve decode of the DNGs as Blackmagic Design Film to S-Log2/S-Gamut, using the process described in the FS RAW workflow document and video on the Convergent Design website. They incorporate a correction for the incorrect white balance metadata.

FS5_3200K_BMF_SL2_SG_EE_FIX.cube
Apply this LUT in Resolve to FS5 material shot as DNG RAW at, or near, 3200K. The Color Space and Gamma in the Raw tab should be set to Blackmagic Design Film. The result will be an S-Log2/S-Gamut image, to which the Odyssey preset SONY_EE_Slog2_LC709A.cube LUT can then be applied.

FS5_5500K_BMF_SL2_SG_EE_FIX.cube
Apply this LUT in Resolve to FS5 material shot as DNG RAW at, or near, 5500K. The Color Space and Gamma in the Raw tab should be set to Blackmagic Design Film. The result will be an S-Log2/S-Gamut image, to which the Odyssey preset SONY_EE_Slog2_LC709A.cube LUT can then be applied.

RAW to ProRes

Media recorded as RAW to ProRes will have the correct white-balance, but the use of an incorrect matrix means that it will not match the S-Log2/S-Gamut output of the camera. The following LUTs correct for this matrix, to give a good match to the camera's S-Log2/S-Gamut output.

FS5_EE_3200K_RPR_FIX_RESOLVE.cube
Apply this LUT in Resolve to FS5 material shot as RAW to ProRes at, or near, 3200K. The result will be a corrected S-Log2/S-Gamut image, to which the Odyssey preset SONY_EE_Slog2_LC709A.cube LUT can then be applied.

FS5_EE_5500K_RPR_FIX_RESOLVE.cube
Apply this LUT in Resolve to FS5 material shot as RAW to ProRes at, or near, 5500K. The result will be a corrected S-Log2/S-Gamut image, to which the Odyssey preset SONY_EE_Slog2_LC709A.cube LUT can then be applied.

FS5_EE_3200K_RPR_FIX_LC709A.cube
Use this LUT in the Odyssey when recording FS5 RAW to ProRes at, or near, 3200K, in place of the preset SONY_EE_Slog2_LC709A.cube LUT. This is a modified version of that LUT, which incorporates a matrix correction to give a good match to the result of applying the preset LUT to the camera's S-Log2 output.

FS5_EE_3200K_RPR_FIX_LC709A-1.cube
Use this LUT in the Odyssey when recording FS5 RAW to ProRes at, or near, 3200K when overexposing by one stop, in place of the preset SONY_EE_SL2_L709A-1.cube LUT. This is a modified version of that LUT, which incorporates a matrix correction to give a good match to the result of applying the preset LUT to the camera's S-Log2 output.

FS5_EE_3200K_RPR_FIX_LC709A-2.cube
Use this LUT in the Odyssey when recording FS5 RAW to ProRes at, or near, 3200K when overexposing by two stops, in place of the preset SONY_EE_SL2_L709A-2.cube LUT. This is a modified version of that LUT, which incorporates a matrix correction to give a good match to the result of applying the preset LUT to the camera's S-Log2 output.

FS5_EE_5500K_RPR_FIX_LC709A.cube
Use this LUT in the Odyssey when recording FS5 RAW to ProRes at, or near, 5500K, in place of the preset SONY_EE_Slog2_LC709A.cube LUT. This is a modified version of that LUT, which incorporates a matrix correction to give a good match to the result of applying the preset LUT to the camera's S-Log2 output.

FS5_EE_5500K_RPR_FIX_LC709A-1.cube
Use this LUT in the Odyssey when recording FS5 RAW to ProRes at, or near, 5500K when overexposing by one stop, in place of the preset SONY_EE_SL2_L709A-1.cube LUT. This is a modified version of that LUT, which incorporates a matrix correction to give a good match to the result of applying the preset LUT to the camera's S-Log2 output.

FS5_EE_5500K_RPR_FIX_LC709A-2.cube
Use this LUT in the Odyssey when recording FS5 RAW to ProRes at, or near, 5500K when overexposing by one stop, in place of the preset SONY_EE_SL2_L709A-2.cube LUT. This is a modified version of that LUT, which incorporates a matrix correction to give a good match to the result of applying the preset LUT to the camera's S-Log2 output.

Click the link below for Sony FS RAW Post Workflow LUTs

Post Workflow LUT Downloads

IMPORTANT NOTE:

Because these LUTs all incorporate corrections for errors in Firmware 2016.06, they will no longer work correctly when a future firmware update fixes the errors. At that point the RAW to ProRes correction LUTs will no longer be required, and new versions of the BMF to S-Log2 LUTs will be released.

Applies To

Odyssey7Q+, Odyssey7Q, Sony FS RAW Record Option

Related Articles

Downloading LUTs

Odyssey RAW Bundle

On-Set Monitoring Utilizing the Odyssey LUT System

Odyssey/Apollo Firmware v2016.06 - Release Notes

Details

Created : 2016-06-21 11:30:14, Last Modified : 2016-06-21 13:13:42

User Comments

feedback