Slide background

Contributing to the power and versatility of the Odyssey7Q and Odyssey7Q+ is the ability to display and route 3D-LUTs. Signals with 3D-LUTs applied can be displayed on the OLED, measured on the Image Analysis Tools and output over multiple SDI outputs.

LUT System


The Odyssey comes pre-loaded with numerous preset LUTs and additional LUTs are available for download on this website. Custom 3D-LUT files can be created and exported from software such as DaVinci Resolve and Pomfort LiveGrade as .CUBE files and converted for use in the Odyssey using the free 3D-LUT App.

3D-LUT Support

What is a 3D-LUT?

A 3D LUT is a way of transforming an image, where any set of red, green and blue values at the input map to a different set of red, green and blue values at the output. Unlike a 1D LUT, where a given red value at the input will always map to the same red value at the output (like Curves in Photoshop) with a 3D LUT, the output value in each channel is affected by the input values in all three channels.

Read More

Display & Output

The Odyssey allows you to apply a LUT to the image on the OLED display, and independently control whether the LUT is applied to each of the SDI outputs, the HDMI output, and the monitoring tools. Check the log image from your camera and send the image with LUT applied to external monitors.

Product Timeline

LUTs in Post

When a particular LUT has been used in monitoring on a shoot, the normal practice is to apply that LUT to the dailies, so that the image seen in editorial is the same as the one seen on set. The Odyssey records an XML sidecar file with each clip recorded, and the LUT active when a particular clip was recorded is stored in the tag. This can be used to identify what LUT should be applied to what clips.

Where are the LUTs

The Odyssey monitor/recorder holds a large LUT Library system within it. Open the LUT menu and there awaits a folder containing a number of preset LUTs provided by Convergent Design. Additional folders are available for users to load up to 150 more LUTs.


LUT Routing

LUTs can be output in various ways depending on the application.

Example of LUT Routing


High-Speed ProRes
FS700 Setup - High Speed
FS7 Setup - RAW/High Speed