Can LUTs be used with Apollo?

Can LUTs be used with Apollo?

Some video cameras can output a Log signal that flattens the contrast, allowing for
the greatest range in exposure and color correction options in post. Apollo includes
a number of preset LUTs for various model cameras that apply a standard color
correction to the OLED and video outputs for a pleasing image while allowing the
Log image to be recorded for later precision color correction. Custom LUTs can also
be loaded into Apollo.

On the Lower Toolbar, press and hold LUT.

Note that the QUAD SELECT buttons may be displayed on the Lower Toolbar. If so,
press and hold the QUAD button to access the menu. Then select OLED+TOOLS to
swap the button controls on the Lower Toolbar.

In the LUT menu, select the appropriate LUT for your cameras. You may also load
custom 3D-LUTs that can be created on various color correction programs. Note that
a single LUT will be applied to all camera inputs.

The LUT can be routed separately to the OLED screen, the Monitoring Tools as well
as the three video outputs (HDMI OUT, SDI A OUT, and SDI B OUT). Press
CUSTOMIZE OUTPUTS to select where the LUT will be applied. Note that selecting
MIRROR OLED will also send Monitoring Overlays such as the Monitoring Tools and
the Live-Switch reference frames to the selected output.

Apollo has three video outputs, HDMI OUT, SDI A OUT, and SDI B OUT. HDMI OUT
and SDI A OUT will always show the Quad-Split view. These outputs can be clean or
have the OLED Overlays (Live-Switch reference lines and Monitoring Tools) appear
using the LUT control even if no LUT is applied.

1. On the Upper Toolbar, press the INPUT/OUTPUT STATUS button.
2. Press OUTPUT STATUS.
3. Press CUSTOMIZE SDI A, CUSTOMIZE SDI B, and CUSTOMIZE HDMI to select LUT
ON, LUT OFF, or MIRROR OLED. SDI B will never show OLED Overlays.

Note that these controls are mirrored in the CUSTOMIZE OUTPUTS controls in the
LUT menu.

feedback